HPET-113 PET Film Quick Details
Material: PET
Type: Stretch Film
Usage: Packaging Film
Feature: Moisture Proof
Hardness: Soft
Processing Type: Casting
Transparency: Translucent
Place of Origin: China (Mainland)
Norminal Thickness: 12um
Corona Discharge: NO corona discharge
Roll ID: 76.2mm(3''),152mm(6'')
Connector Number:≤1
Thickness: 8~75um
Application: printing
Features
1). Optically brilliant, clear appearance
2). Higher modulus and excellent tensile strength
3). Excellent dielectric properties
4). Good flatness and coefficient of friction (COF)
5). Tear-resistant and puncture-resistant characteristics
6).Wide range of thickness 8 micron up to 75 micron
7). Excellent dimensional stability over a wide range of temperatures
8). Very good resistance to most common solvents, moisture, oil, and grease
9). Excellent barrier against a wide range of gases.
10).Widely use for packaging, printing, laminating,metallizing, decroation, electrical insulation
Usage
Our products BOPET film (8-75um) can be widely used in the packaging of the food,medicine and other commodities,the industry application field such as the tape,the card,electrical insulation film.
Product specification | ||
Thickness |
Width |
Roll ID |
8~75μm |
380~2000mm |
76.2mm(3") , 152mm(6") |
Connector Number |
The connector number of each roll for superior product:≤1; Base on the Standard length, connector rate 0f each roll: ≤10%. |
|
Note: Other specifications of the film may be adjusted upon consumer request.Conventional length is equivalent to 12 μm of 6,000 m, 12,000 m, 18,000 m, 24,000 m, etc. |
Typical property values
Item |
Units |
Typical Values |
Test Method |
|
Nominal thickness |
um |
12 |
DIN 53370 |
|
Thickness Deviation |
% |
±1.5 |
ASTM D 374 |
|
Tensile strength(MD/TD) |
MPa |
220/240 |
ASTM D 882 |
|
Elongation(MD/TD) |
% |
120/110 |
ASTM D 882 |
|
Heat Shrinkage(MD/TD)150°C,30min |
% |
1.8/0.3 |
ASTM D 1204 |
|
Haze |
% |
3 |
ASTM D 1003 |
|
Gloss |
% |
130 |
ASTM D 2457 |
|
Surface Wetting Tensions |
Corona Discharge |
Dyne/cm |
52 |
ASTM D 2578 |
|
NO corona Discharge |
|
40 |
|
Packaging & Delivery
Packaging: according to customer's requirements
Delivery: within 2 weeks after receiving the prepayment