Ultra-sonic Cleaning Machine

Original
price: Negotiable
minimum:
Total supply:
Delivery term: The date of payment from buyers deliver within days
seat: Guangdong
Validity to: Long-term effective
Last update: 2017-11-17 14:44
Browse the number: 323
inquiry
Company Profile
 
 
Product details

● Fast Remove Debric High Frequency Fiber Optic Connector Ultrasonic Cleaning Machine

1. Why Do You Need Fiber Optic Connector Ultrasonic Cleaner?

Since its development in the 1970s, fiber optic communication has revolutionized the way information is sent and received. The method is achieved by transmitting pulses of light down an optical fiber, which then forms a carrier waveform that is modulated to send a signal. Due to the narrow diameter of the fiber, fiber optic connectors must be cleaned in order to remain effective. A contaminated fiber connection may eventually cause failure of the component, and in some cases, the entire system. Even common microscopic debris such as dirt or dust can block optical signals from being transmitted. Additionally, certain particles can damage the glass surface, creating unnecessary downtime and costly servicing.

2. Common Debris Found on Connectors

Dust and Dirt: Dirt and dust are common contaminants found on connectors. Virtually unavoidable, dirt and dust can be can be spread airborne or by human touch.

Oil: Oil is often found on connectors as a result of contact with human skin. Human skin produces naturally occurring oils that will contaminate the connector if gloves are not worn. Additionally, if lubricants such as WD-40 are used, it will also cause contamination. Metallic Flakes: Fibers and connectors are often housed in plated metals. Even under normal usage, the plated metal may shed particles that can affect the connector. Furthermore, if the connector was wiped with a dry cloth, this will charge the connector, making it a magnet for the metal flakes.

3. Advantage of ultrasonic cleaner?

Cleaning Fiber Optics: Always Inspect 

The sensitive nature of optical fibers requires accuracy and a structured system to be in place when it's cleaned. Operators should always inspect the fiber optic connectors before beginning the cleaning process.


Reminders about inspection:

Turn off any laser sources before you begin inspection.

Do not look into a fiber when the system lasers are still turned on.

Disconnect cables at both ends.

Place a protective cap on unplugged fiber connectors.

Use a fiberscope to inspect the connector, bulkhead, or component.

Keep all unused protective caps and cleaning tools (swaps, lint cloths, etc.) in sterile containers that can be resealed.


Ultrasonic Cleaning: The Preferred Method

There are several options of cleaning fiber optics, including using lint free cotton swaps or compressed gas. However, when precision is required ultrasonic sonic cleaning has been the preferred method to wet-clean fiber optics. Advantageous for connectors in a fixed or in-house location, ultrasonic cleaning quickly and efficiently eliminates contaminates.

Combined with a cleaning solution (usually is propyl alcohol), fiber optic connectors are placed into the ultrasonic cleaner's chamber along with its sleeve. The cleaner then uses a high ultrasound frequency to target dirt, oils, metallic particles, and other contaminates. The dirt and grime is then removed from the connectors and components without any damage or further contamination being done to them. Safe and cost-effective, many ultrasonic cleaners feature audible built-in timers and adjustable cleaning intensity levels, as well as temperature adjustment options.


● Feature Of Cleaning Machine:

► All stainless steel - ensures many years of trouble free performance;

► The most advanced transducer design in the industry;

► Simultaneous technology - provides the highest performance of any system;

eliminates standing waves and provides a safe cleaning environment for all gun surfaces;

► Best warranty in the industry - you talk directly to our support staff who designed and built the system;

► Two Cleaning Process To Provide Detail care.


● Specification:

Model

FOCC-020T with Degas

Tank size

240*135*100mm

Ultrasonic power

120W/60W

Heating power

100W

Timer

0~30 min adjustable

Heater

Normal ~ 80℃

Others

SUS basket, lid

 

Features

One Machine
Two Cleaning Process:
Full wave for precision cleaning;
Half wave for rough cleaning;


Basic Information:

Cleaning Media

Wet Cleaning

Cleaning Precision

Precision Industrial Cleaning

Principle

Physical and Chemical

Condition

New Original Type

Feature

Eco-Friendly

Ultrasonic Power

120W

Special Function

Degassing and Two Cleaning Cycle

Transport Package

Transport PackageIndividual Carton Box

Origin

China Mainland

Automation

Semi-automatic


● Other Recommendation:

If tank size is not suitable for your spare parts, we have other big ultrasonic cleaner in store. And we can design and produce any special function ultrasonic cleaning machine you need.


● Shipping Info:

Measurement for 1pcs:0.018CBM

48pcs per CBM

For any further information, please feel free to contact us.


● FOCC Service.
► Warranty:

12 months warranty for FOCC ultrasonic cleaner.

Lifetime technical support
If any technical problem during warranty time, replacement parts will be sent free of charge.

► Advantage:

1. Reply your Inquire in 24 working hours.

2. Experienced staffs answer all your questions in fluent English.

3. OEM is available if the quantity is large.

4. We offer very competitive for all our products.

5. The most important thing is that our product of quality, our design is innovative,we choose industrial grade quality circuit board, we have advanced production line and have very strict quality control procedures, the failure rate is less than 2%, which is the lowest in this line.

► Raw Material Inspection:

Most of our raw material suppliers are best ,our QC and engineers would make strict inspection of the raw material step by step to ensure quality product. Any unqualified material will be rejected to guarantee best quality. It is the energy released by this collapse that will assist a detergent in breaking the bonds between parts and their soils.

► 100% product inspection:

We QC team would check the production process to ensure machine 100% qualified. Each unit would be under testing at least 4hours before packed, and sales person will send inspection pictures for your checking.


Total0bar [View All]  Related Comments
 
more»Other products

[ Products search ] [ favorites ] [ Tell friends ] [ Print ] [ Close ]