Characteristics:
The tank for this model is a kind of closed type, the one with normal working pressure- 6bar, so it can be connected with city water directly. It will relief the pressure automatically, when the pressure is more than 6 bar inside the tank. And the water is heated rapidly by heat pipe which will transfer the heat energy into the tank (can refer the page 3 about heat pipe vacuum tube). This model can heat the water much faster than non-pressure and pre-heat models. The pressure of this model will be decided by the pressure of the tap water.
Type |
Vacuum tube |
Volume(L) |
GrossWeight (KG) |
20GP/40HQ Loading Qty(sets) |
||
Φ(mm) |
Length(mm) |
Qty(pcs) |
||||
DIYI-IP01-10 |
58 |
1800 |
10 |
100 |
69 |
77/183 |
DIYI-IP01-15 |
58 |
1800 |
15 |
150 |
91 |
55/130 |
DIYI-IP01-20 |
58 |
1800 |
20 |
200 |
115 |
42/98 |
DIYI-IP01-25 |
58 |
1800 |
25 |
250 |
143 |
35/81 |
DIYI-IP01-25 |
58 |
1800 |
30 |
300 |
173 |
29/67 |
Technical data:
Inner tank: SUS 304-2B/1.2mm, Φ360mm
Outer tank: Galvanized steel/0.41mm, Φ460mm
Insulation Layer: high density polyurethane foam 50mm
Vacuum tube: 58*1800mm/SS-CU-ALN or AL-N-AL coating
Bracket: Galvanized steel 1.5mm with 27/38/45 degree installing angle.
Electrical heating connection(inch): ¾ or 1¼
Water connection(inch):½ or ¾
NOTE: All the systems are available for the customization.
Optional Accessories
1.Temperature Monitor (showing hot water temperature inside the main tank)
2.Controller SR609 (showing hot water temperature inside the main tank & showing the water level & controlling the starting time of the electrical heater)
3.Electrical Heater (as back-up for cloudy or rainy days)